BUTTWELD END CAPS /SOCKET WELD END CAPS / THREADED END CAPS PIPE FITTINGS MANUFACTURER, EXPORTER
‘C- Way Engineering Exports’ manufacturers end caps & plugs pipe fittings in compliance with various international standards such as ASTM/ANSI/ASME/BS/EN/DIN/JIS/IS in Carbon Steel, Stainless Steel, Duplex Steel, and Alloy Steel also available in special alloys such as Monel, Inconel, Hastelloy. We offer end caps & plugs from 1/2 inch to 24 inch size and erw, welded and fabricated end caps from 1/2 inch to 48 inch in diameter, with variations based on specific requirements to accommodate diverse piping systems demand.
Pipe end caps & plugs are essential components to seal the ends of pipes and block the flow. It is a protective device for any piping system, it securely close off the ends of pipes, protect pipes during transport and storage, allow pipes for pressure tests by sealing the system and useful for maintenance of piping systems, provide access for cleaning or repairs by easily removable caps or plugs. Pipe caps & plugs are widely used in industrial, commercial, and domestic water supply lines, Steam pipe lines in oil & gas, power plants, and chemical lines in process and chemical industries.
All pipe fittings with standard sizes and materials are readily available in stock for immediate delivery. "Looking for large diameter pipe fittings? Contact us today for Customized Pipe Fittings.
Butt-weld Caps: Welded onto the pipe end, offering a permanent closure
Threaded Caps and Plugs: Screwed onto threaded pipe ends for a secure but removable seal.
Socket-weld Caps: Welded onto the pipe end but with a socket for easy alignment and welding.
Plugs in piping systems serve a function similar to pipe caps, but there is a key difference between the two. Pipe caps typically have female threads, which means they fit over the end of a pipe by being welded or screwed onto it. On the other hand, pipe plugs have male threads, meaning they are screwed into the pipe itself. In essence, a pipe cap encloses the pipe by fitting over it, while a plug seals the pipe by fitting inside it.
We adhere to stringent quality and manufacturing standards to ensure the reliability and performance of our pipe fittings.
| Buttweld pipe fittings Specifications: | |
|---|---|
| Outer diameter : | Seamless pipe fittings (1/2″～24″), ERW / Welded / Fabricated pipe fittings (1/2″～48″) |
| Wall Thickness : | 3mm – 40mm / SCH3, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Special Services : | Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering |
| Material Grades | Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel. |
| ASME : | ANSI B16.9, ANSI B16.25, ANSI B16.28, ASTM A403, ASME SA403, MSS-SP-43 |
|---|---|
| DIN : | DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 |
| EN : | EN10253-1, EN10253-2 |
| Stainless Steel : | ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L |
|---|---|
| Carbon Steel : | ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70. |
| Low Temperature Carbon Steel : | ASTM A420 WPL3, A420 WPL6 |
| Alloy Steel : | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Duplex Steel : | ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462 |
| Nickel Alloy : | ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 ) |
| Forged pipe fittings Material Grades: | |
|---|---|
| Stainless Steel | ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L
The material for forged stainless pipe fittings conforms to ASME A182 The dimensions for forged stainless steel pipe fittings conform to ASME B16.11 |
| Carbon Steel | ASTM A105, A350 LF2, A106 Gr.B, A234 WPB
The material for forged carbon steel pipe fittings conforms to the requirements of ASTM/ASME A105/SA105 the dimensions for forged carbon steel pipe fittings conform to ASME B16.11. |
| Material Grades | |
|---|---|
| ASME | ANSI B16.9, ANSI B16.25, ANSI B16.28, ASTM A403, ASME SA403, MSS-SP-43 |
| DIN | DIN2605, DIN2615, DIN2616, DIN2617, DIN28011. |
| EN | EN10253-1, EN10253-2 |
| Stainless Steel Elbow | ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L |
| Carbon Steel Elbow | ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70 |
| Low Temperature Carbon Steel Elbow | ASTM A420 WPL3, A420 WPL6 |
| Alloy Steel Elbow | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Duplex Steel Elbow | ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462 |
| Nickel Alloy Elbow | ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS n10276 ( HASTELLOY C 276 ) |
| Material Grades | |
|---|---|
| Pressure Class | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Dimension Specifications | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Sizes | 1/8″- 4″ (DN6~DN100) |
| Manufacturing Standards | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Stainless Steel | ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L The material for forged stainless Elbow conforms to ASME A182 The dimensions for forged stainless steel Elbow conform to ASME B16.11 |
| Carbon Steel | ASTM A105, A350 LF2, A106 Gr.B, A234 WPB The material for forged carbon steel Elbow conforms to the requirements of ASTM/ASME A105/SA105 The dimensions for forged carbon steel Elbow conform to ASME B16.11. |
As decades of experience in the industry, 'C-Way Engineering Exports’ witnessed the critical importance of utilizing high-quality Pipe fittings that meet international standards. Whether you are in Oil and Gas, petrochemical, power generation, or any other industry relying on efficient and reliable piping systems, investing in high quality fittings is essential. Don't compromise on safety, performance, or longevity. Partner with trusted supplier like us ‘C-Way Engineering Exports’, who prioritize quality and adherence to standards, ensuring your projects are built to last. Contact us today to explore our full range of Pipe fittings and experience the excellence of our products and how we can support your piping needs with our expertise and premium-grade fittings. Let's build a robust infrastructure together.
Yes, our products are ISO 9001:2015, ISO14001-2015 certified, CE, ATEX and PED certified, manufactured in compliance with API, ASME, ASTM, DIN, and BS standards.
Absolutely! We specialize in providing customized industrial valves, pipe fittings, flanges, and pipes to meet your project’s exact specifications. Our experienced engineering team will work closely with you to deliver solutions tailored to your requirements.
Yes, we provide detailed technical drawings, datasheets, and dimensional charts for all our standard and custom products to support design, procurement, and installation.
Yes, we provide EN 10204 3.1 Material Test Certificates with full traceability. These include chemical composition, mechanical properties, and test results. For projects requiring third-party inspection, we can also arrange EN 10204 3.2 certification upon request.
Yes, our products fully comply with EU regulations, including ATEX for explosive atmospheres, the Pressure Equipment Directive (PED 2014/68/EU) for pressure-bearing equipment and carry the CE marking as required.
We accept:
Yes, we provide:
Our products undergo stringent quality checks, including:
Yes, we have a robust manufacturing setup capable of handling large-scale production. Whether it’s a small batch or bulk order for an EPC project, we ensure timely delivery without compromising quality.
Absolutely! We’ve had the privilege of working with clients across industries like oil & gas, water treatment, chemicals, power, and more over the past 25+ years. Many of them have shared their positive experiences with us—whether it’s about the quality of our products, our responsiveness, or the reliability of our deliveries. We believe real feedback speaks louder than promises. That’s why we’ve gathered a collection of customer testimonials and case studies that showcase how our valves, fittings, flanges, and pipes have performed in actual projects. You can explore them here: Testimonials If you need industry-specific references or would like to speak to one of our existing clients, we’re happy to arrange that too. Just let us know!
Our lead times vary depending on the order size and product specifications. Standard products are available for immediate dispatch, while custom orders typically take 4–8 weeks. We prioritize timely delivery for all orders.
You can contact us via email, phone, or our website. Please provide details such as:
We offer technical assistance, spare parts supply, troubleshooting, and documentation support even after delivery.
We are here to help you!
+91 9391116127
sales@cwayexports.com
